Single pole, non-directional, O/C or E/F relay
₹15,873.00
Product Code: JRC 012
Time line :Products will be shipped within 3 weeks from the date of order
Stock In Stock
Viewed 8777 times
Categories
Cart
Account
Search
Recent View
All Categories
×
-
Products Category
- Earth Leakage Relays
- Electromechanical Auxiliary & High Speed Tripping Relays
- Electronic Hooters
- LED Indicating Lamps
- LED Semaphore Indicators
- Micro Processor Based Directional / Non-directional, Non-Communicable Current Relays
- MICRO PROCESSOR BASED INSTANTANEOUS / DEFINITE TIME AC VOLTAGE RELAYS
- Micro Processor Based Multi Shot, Auto Reclose Relays
- Micro Processor Based Neutral Earth Resistor Monitoring Relays
- Micro Processor Based PT Fuse Failure Relays
- MICRO PROCESSOR BASED RESTRICTED E/F RELAYS
- Micro Processor Based Trip Circuit Supervision Relays
- Numerical Check Synchronizing Relays
- Numerical Directional / Non-directional, Non-Communicable Current Relays
- Numerical Non-directional Inverse Time Current Relays Without Communication
- NUMERICAL OVERFLUX RELAYS
- Numerical Transformer Differential Relays
- Panel Accessories
- Push Buttons
- Semaphore Indicators
- Terminal Blocks & Plugs for Testing
- Time Delay Relays
- Two Stage Frequency Relays
- Micro Processor Based Inverse Time Non- Directional, Non-communicable Current Relays
- Non-directional Inverse Time Current Relays With/without Communication
- Micro Processor Based Inverse Time Non-directional, Non-communicable Current Relays
- Micro Processor Based Instantaneous / Definite Time Ac Voltage Relays
- Micro Processor Based Instantaneous / Definite Time Battery E/F Relays
- Micro Processor Based Instantaneous / Definite Time Current Relays
- Micro Processor Based Instantaneous / Definite Time Dc Voltage Relays
Shopping Cart
×
Your shopping cart is empty!
Search
×
Recent View Products
×
Product Description
Features
- Software based design
- Wide setting range
- Wide auxiliary supply
- Low burden
Application
The relay provides Over Current or Earth fault protection of
Generators, Motors, Transformers, Feeder etc., and where
definite time protection is required.
PRINCIPLE OF OPERATION
The relay provides Over Current or Earth fault protection for power systems. Relay operating time
is determined by the set definite time. The relay measures the current from input CT and if it
exceeds the set threshold, it extends a trip signal after the operating time, which is determined by
set definite time. The relay output contacts are self reset type. TEST button facilitates testing of
relay contacts for trip and alarm circuits.
Ratings
SETTINGS
OVER LOAD RATING
BURDEN
Current rating :
1A / 5A
Aux. Supply:
20 to 60V DC
75 to 150V AC / DC
175 to 300V DC
185 to 250V AC
75 to 150V AC / DC
175 to 300V DC
185 to 250V AC
Over Current Settings :
50-200%
Earth fault setting :
2.5-80%
Definite time setting :
0 to 25s in steps of 0.1s
Current input :
2 times rated continuous
20 times rated for 3s
40 times Rated for 1s
20 times rated for 3s
40 times Rated for 1s
Current input :
0.2 VA at Rated 5A
0.05VA at Rated 1A
0.05VA at Rated 1A
Aux. Supply :
Less than 3W (Non Operated)
Less than 5W (Operated)
Less than 5W (Operated)
ACCURACY
CONTACT RATINGS
CONTACT DURABILITY
INSULATION
STANDARD COMPLIANCE
Operating value:
±5%
Operating Time:
± 5% or±20ms
Instantaneous time:
Less than 40ms
Relay rattng :
10A at 24V DC/230V AC
Loaded contact :
10,000 operations min.
Unloaded contact :
20,000 operations min.
- 2KV RMS, 50 Hz for 1 minute / 2.5 KV for 1 sec .
Between all terminals and earth. - 1KV RMS, 50 Hz for 1 minute across open contacts
Weight Case:
2000 gms. (approx),
Case Size:
144sq mm, depth 232mm
Installation:
Flush mounting
Panel cutout:
138mm x 138mm
Accuracy Test :
IEC 60255-151
Insulation Test :
IEC 60255-27
TERMINAL DIAGRAM
Ordering Information
Current rating :
1A or 5A
Relay :
JRC 012 (E/F) For Earth fault Protection
JRC 012 (O/C) For Over Current Protection
JRC 012 (O/C) For Over Current Protection
Aux. Supply :
20 to 60V DC
75 to 150V AC/DC
175 to 300V DC/ 185 to 250V AC
75 to 150V AC/DC
175 to 300V DC/ 185 to 250V AC